Our filter reactors are made of high-class transformer sheets and copper wire or aluminum band.They are dried and impregnated in vacuum with evironment friendly low-styrole resin which ensures they can withstand high voltages, have low noise levels, and offer a long operating life. Depending on their rated power, the reactors are provided with either terminal blocks or terminal lugs/cables. The connection of the aluminium reactors is made through copper terminals as well, which are reliably connected with the aluminium band by a special, well-proven welding method.
Rating: 12.5/25/50/75/100/150 Kvar
Voltage: 400/415/440/480/515/690/800/1200 KV
Application: Detuned/Tuned harmonic filter.
Our reactor windings consist of numerous aluminum or copper conductors connected in parallel. These conductors can be insulated single wires, insulated cables or alumininum profiles separated by fiberglass spacers. The cost-effective Solution to be selected, in terms of dimensions and conductor type to be used in each design, depends on the required ratings for the equipment. For encapsulated design, the conductors are mechanically immobilized and Encapsulated by epoxy impregnated fiberglass filaments forming cylinders. Depending on the reactor ratings, one or more of these cylinders are connected in parallel between aluminum or copper spiders. The individual cylinders are separated by fiberglass spacers forming cooling Ducts. F+155 C & H-180 C Class.
Rating: 75/100/150 Kvar
Voltage: 3.3/3.6/6.6/7.2/12/22/33 KV
Application: Detuned/Tuned Harmonic Filter