3.3Kv to 33Kv Grade- (BASEC/KEMA/CPRl/ERDA tested) three core Copper / AluminiumConductor,Conductor screened with extruded semi-conducting compound, XLPE Insulated, insulation screened with semiconducting compound in combination with copper tape (0.3 KA for One Sec.), PVC ST2/FR/FRLSH/LSZH Inner Sheathed armoured/ GI Steel (Aluminium in case of single core) FLAT/Round Armoured and Overall PVC ST2/ FR/ FRLSH/ LSZH sheathed cable conforming to IS:7098/ll/85, IEC 60502-2/ BS 7835 From sizes 35 sq.mm to 1200 Sq.mm, above cables can be supplied with lead sheath whenever required.
3.3kv to 33kv grade-(BASEC/KEMA/CPRl/ERDA Tested) Single core copper /Aluminium Conductor, Conductor screened with extruded semi-conducting compound (11KV E & above), XLPE Insulated, Insulation screened with semiconducting compound (11KV E & above) in combination with copper tape , Unarmoured/ Aluminium Flat Strip / Round Wire Armoured and verall PVC ST2/ FR/ FRLSH/ LSZH sheathed cable conforming to IS:7098/ll/85, IEC 60502-2/ BS 7835 From sizes 35 sq.mm to 1200 Sq.mm above cables can be supplied with lead sheath whenever required.
Copper/Aluminium solid/stranded conductor, XLPE insulated, cores laid up, PVC inner sheathed, unarmoured/armoured, extruded PVC/PE /LSZH sheathed cables with rated voltage 0.6/1.0 kV from 1.5 mm² to 1000 mm² in 1/2/3/3.5/4 Cores confirming to BS 5467/BS 6724/IEC 60502-1.
1100 Volts Grade- (BASEC/KEMA/CPRI/ERDA tested) Control Copper Cables, Solid/Stranded conductor, PVC/XLPE/HR PVC Insulated, Cores laid up, PVC/ HR PVC/ FR/ FRLSH/ LSZH Taped/Extruded Inner Sheathed, Unarmoured/ GI Steel (Round Wire/Flat Strip) Armoured, Extruded PVC/ HR PVC/ FR/ FRLSH/ LSZH Outer Sheathed, cables from 2 to 100 crore in 1.5 and 2.5.sq.mm as per IS 1554(Part1) / IS 7098(Part1) 1998 and Generally confirming to IEC60502-1/BS 5467/BS 6724.
Energy Efficient wires range 0.50 SQ.MM to 1000 SO.MM in lass 5 copper conductors with different insulation properties.
Single core multi-stranded copper conductor, PVC insulated wires with normal flame retardant properties.
Single core multi-stranded copper conductor, HRFR PVC insulated wire with heat resistant and excellent flame retardant properties.
Single core multi-stranded copper conductor, HR PVC insulated wire with heat resistant and normal flame retardant properties.
Single core multi-stranded copper conductor, HR-FRLSH PVC insulated wires with heat resistant, excellent flame retardant and low smoke properties.
Flat : 3 core x 1.50 SQ.MM, Round : 3 core and 4 core x 1.5 SQ.MM in class 5 copper conductors with pcv/xlpe insulation and PVC st2 sheathing properties.
2 core to 61 core x 0.50 sq.mm to 4 sq.mm, 2 core to 4 core from 6 sq.mm to 120 sq.mm in class 5 copper conductors with different insulation and sheathing properties.
Type 1 : Class 5 ATC copper conductor, insulated and sheathed with Electron beam XLPO confirming to TUV approved standard EN-50618.
Type 3 : Class 5 Base copper conductor, XLPE insulated and PVC UV stabilized Sheathed
Range up to 245 kV – Heat Shrink & Cold Applied
Extensive research in developing heat shrink technology and decades of experience on field, Raychem has a complete system of cable accessories up to 245 kV. Long term performance of Raychem heat-shrinkable materials has been demonstrated by the well-proven Power Accessory System. Millions of installations in some of the most severe service conditions have confirmed the reliability of the heat-shrink technique under high electrical, thermal and environmental stresses. Cable accessories of all voltages include a specially designed stress control mechanism which controls the electrical stress distribution for an enhanced product performance. In terminations, the insulating tubing ensures non-tracking and erosion resistant surface at extreme operating conditions./span>
Range upto 1.1kV – Heat Shrink & Cold Applied
Insulating and sealing performance of Raychem materials has been demonstrated for over 40 years. These proven materials form the basis for Raychem inline joints for cables up to 1.1 kV. While fully comparable in ease and speed of installation to other modern methods, Raychem joints eliminates delay due to mixing, pouring and topping-up, as they require no jointing compound. This feature cuts out curing time and enables joints to be buried immediately. The heat shrinkable joint components be stored in varying climatic conditions without risk of long-term deterioration.Cold Applied Low Voltage Joints
Range upto 3.6kV to 36kV – Heat Shrink & Cold Applied
Over the last four decades, engineers in utilities and industries around the world have specified millions of Raychem cable accessories at distribution voltages up to 36 kV. Raychem accessories are identified with reliability because of their unparalleled long-term performance in the field. With constant improvement based on extensive experience in the field and outdoor testing sites in polluted and desert environments, we have incorporated a new generation of Raychem heat-shrinkable cable accessories that are easier to select and install, without compromising the reliability of the proven materials technology.
Range upto 52kV & 72kV – Heat Shrink
Raychem’s 72 kV terminations are suitable for all climates and environments, even severely polluted areas and for all installation conditions including top feed installation. Factory-engineered kits contain a proven termination system which saves space, facilitates installation and enhances system reliability. Elastomeric 72 kV joints are suitable for all polymeric cables and can accommodate various cross-bonding shield breaks and external grounding arrangements.Heat Shrink High Voltage Joints
Range upto 72kV to 245kV – Pre Moulded
With latest manufacturing technology and quality management processes, material expertise and testing facilities for all related fluid, gaseous and solid insulation materials, enable us to offer a complete range of Extra High Voltage cable accessories for lifetime of service.EHV Outdoor Terminations